Boat Deck and Marine Carpentry Tools

PlasDECK Groover Tool

Part # PT-2307

The PlasDECK Groover is used by installers to create grooves that are used for holding welds.
Weight: 1 lb.

PRICE:

Quantity:

PlasDECK Hooked Groover Tool

Part # PT-9010

The PlasDECK Groover is used by installers to create grooves that are used for holding welds.
The Hook Groover is used by installers to make grooves that are used holding welds. The hook shape helps with curves and other intricate areas.

Weight: 1 lb.

PRICE:

Quantity:

PlasDECK Template Material

Part # PD-2400

If you want to order PlasDECK pre-made panels that are sized to fit your deck spaces, use this template material to make templates. This material is transparent so you can see the deck underneathe and easily mark any outlines, hinges, hardware, hatches, etc. It comes in a 52 inch x 50 foot (1.3m x 15.3m) roll and it’s .007 mil thick. PlasDECK template material is very durable but cuts easily with a good pair of scissors.

Weight: 13 lbs.

PRICE:

Quantity:

PlasDECK Spatula Knife

Part # PT-2301

This is the knife the Pros use! This is most often use when creating caulk lines between borders and the rest of the deck. The flexible, wide, rounded edge is perfect for trimming dry caulk without damaging your deck.

Weight: .5 lbs.

PRICE:

Quantity:

PlasDECK Hooked Utility Knife Blades (5-Pack)

Part # PT-2700

The five-pack of PlasDECK curved knife blades makes cutting intricate details as easy as ever! They fit into any standard utility knife.

Weight: 2.5 lbs.

PRICE:

Quantity:

PlasDECK Curved Utility Knife Blades (5-Pack)

Part # PT-2311

The five-pack of PlasDECK curved knife blades makes cutting intricate details as easy as ever! They fit into any standard utility knife.

Weight: .25 lbs.

PRICE:

Quantity:

PlasDECK Cutting Shears

Part # PT-2309

The PlasDECK cutting shears are used to quickly and effortlessly cut the PlasDECK to length during installation. These are designed to be used on this type of material, and they include a built-in gauge for cutting precise angles.

Weight: .5 lbs.

PRICE:

Quantity:

Stanley Surform Shaver

Part # PT-2308

It’s not really a “cheese grater” but that’s become the company nickname for this tool. It’s really called a Surform Shaver 21-115 by Stanley. This is a quick and easy way to shape edges of PlasDECK, and it’s often used to create a sloped edge around the perimeter of the decking to allow for a gradual transition from the PlasDECK down to the surface of the boat itself.

Weight: .25 lbs.

PRICE:

Quantity:

PlasDECK Trowel

Part # PT-2310

This trowel is designed to make spreading the PlasDECK sausage glue a snap! The notches are 1/16 inch.

Weight: .5 lbs.

PRICE:

Quantity:

PlasDECK Glue Spreader

Part # PT-2313

This flexible plastic spreader is used to spread glue in hard-to-reach places.

Weight: .25 lbs.

PRICE:

Quantity:

PlasDECK Sausage Glue Gun

Part # PT-2515

This Sausage Gun is used to apply the PlasDECK 20 oz. Sausage Glue. This gun features a 12:1 thrust ratio for efficient glue dispensing, a lightweight aluminum barrel for durability and less fatigue, a convenient rotating swivel handle, and double gripping plate technology for long life. It also can easily be adpated for cartridge use for later use with other projects!

Kit includes: 3 Clear plastic nozzles, 3 Black cone nozzles, 2 Replacement polyplastic sausage pistons, 1 Hytrel bulk piston

Weight: 2.5 lbs.

PRICE:

Quantity:

45 Degree Tip for PlasDECK Sausage Glue Gun

Part # PT-2545

This tip fits our Sausage Gun and creates a 45 degree angle which works perfectly for Sausage Glue application. This is great for getting glue into tight spaces.

Weight: 2.5 lbs.

PRICE:

Quantity:

PlasDECK Floor Roller

Part # PT-2312

The PlasDECK Floor Roller is perfect for smoothing and straightening the PlasDECK during installation. This will also help push out any trapped air. After the decking is laid onto the glue, roll over it with long strokes in the direction of the caulk lines.

Weight: 2.5 lbs.

PRICE:

Quantity: