DIY Boat Decking and Yacht Decking Material

PlasDECK 2″ Shiplap Roll Off-White Lines

Part # E-520

This boat decking is more like yacht decking! The material has the deep, rich, look of freshly oiled teak with softer looking off-white caulk lines. It is sure to add the elegance and sophistication your vessel deserves!

This deck material has shiplap edges for ease of use and was designed with the Do-It-Yourselfer in mind. The shiplap edges allow each plank to fit securely next to its neighbor, without gaps. Each piece is a single plank, and this is used mainly where the material needs to curve laterally, especially towards the bow. It’s easier to make a significant curve with the single plank material than it is with the wider 3-plank material.

Each piece is 2 in. wide and 32 ft. long (5.3 square feet, .5 square meters).

Weight: 7 lbs.

PRICE:

Quantity:

PlasDECK 6″ Shiplap Roll Off-White Lines

Part # E-522

This boat decking is more like yacht decking! The material has the deep, rich, look of freshly oiled teak with softer looking off-white caulk lines. It is sure to add the elegance and sophistication your vessel deserves!

This deck material has a shiplap edge for ease of use and was designed with the Do-It-Yourselfer in mind. The shiplap edges allow each plank to fit securely next to its neighbor, without gaps. Each strip of PlasDECK E-522 is fit to the next to form the body of the deck. As the strips are pushed together the glue fills the small crevice between, making it a solid panel.

Each piece is 6” wide and 32’ long (16 square feet, 1.5 square meters). 22 lbs.

Weight: 22 lbs.

PRICE:

Quantity:

PlasDECK 2″ Shiplap Roll Black Lines

Part # E-521

This boat decking is for those seeking that traditional teak look without the hassle. This material has the deep, rich, look of freshly oiled teak and is complimented with the traditional black caulk lines we’ve all come to respect.

E-521: This deck material has shiplap edges for ease of use and was designed with the Do-It-Yourselfer in mind. The shiplap edges allow each plank to fit securely next to its neighbor, without gaps. Each piece is a single plank, and this is used mainly where the material needs to curve laterally, especially towards the bow. It’s easier to make a significant curve with the single plank material than it is with the wider 3-plank material.

Each piece is 2” wide and 32’ long (5.3 square feet, .5 square meters). 7 lbs.

Weight: 7 lbs.

PRICE:

Quantity:

PlasDECK 6″ Shiplap Roll Black Lines

Part # E-523

This boat decking is for those seeking that traditional teak look without the hassle. This material has the deep, rich, look of freshly oiled teak and is complimented with the traditional black caulk lines we’ve all come to respect.

This deck material has a shiplap edge for ease of use and was designed with the Do-It-Yourselfer in mind. The shiplap edges allow each plank to fit securely next to its neighbor, without gaps. Each strip of PlasDECK E-523 is fit to the next to form the body of the deck. As the strips are pushed together the glue fills the small crevice between, making it a solid panel.

Each piece is 6” wide and 32’ long (16 square feet, 1.5 square meters).

Weight: 22 lbs.

PRICE:

Quantity:

PlasDECK 6″ Shiplap Roll No Lines

Part # E-600

This PlasDECK decking material has ‘welding edges’ for use by installers to weld panels together. We sell this blank material for DIY use as well because the top has no lines and this can be used to cut trim pieces, corners, and king planks.

Each piece is 6” wide and 8’ long (4 square feet, .375 square meters).

Weight: 5.5 lbs.

PRICE:

Quantity:

PlasDECK 3″ Tapered Finish Edging

Part # E-606

This pre-cut material is used to make borders around the deck, to create the look of a traditional teak deck. Natural teak decks are built with margin borders around the outside of all areas. These boards help seal and protect the end-grains of the teak deck wood so that the wood will last longer. Of course, PlasDECK synthetic teak decking doesn’t require borders because it won’t rot, but adding borders to PlasDECK provides the most traditional look. Or, if desired, borders can be added as accents only, like along the back of a swim platform or at the edges of steps for visibility. When partial borders are used, we call it “hybrid style.” The design possibilities are endless with PlasDECK!

This edging piece has a tapered edge on one side to make a smooth transition from the decking to the rest of boat.

Each piece is 3” wide and 8’ long (152mm x 2.44m).

Weight: 3.5 lbs.

PRICE:

Quantity: